HSe Heat Shrink Tube Tape for Brother Printers

Compatible Brother Heatshrink Tubing tape.

Colour:
• Black on White or Yellow Tape

Size (recommended cable diameter):
• 5.8mm (1.7mm to 3.2mm diameter)
• 8.8mm (2.6mm to 5.1mm diameter)
• 11.7mm (3.6mm to 7mm diameter)
• 17.7mm (5.4mm to 10.6mm diameter)
• 23.6mm width (7.3mm to 14.3mm diameter)

Cassette Length:
• 1.5m

Check your size: Measure diameter of the wire, and make sure the size of the HS Tape will fit snugly on with enough room to shrink during heating. Too loose and the label may not stay in place.

NOTE: The Brother HSE221 Heat Shrink Tube can ONLY be used in the following Brother handheld label printers to mark cables, fiber and wires:

Check your model can take the correct tape width:
PTE300, PTE500, PTE550W PTE300VP and PTE550WVP
PT-E300, PT-E500, PT-E550W, PT-P750WVP, PT-P900, PT-P900W, PT-P950NW

Or with P-touch label printers that show the HS or HSe logo on the tape cassette cover.

Save big on labelling.

HSE-241 HSE-231 HSE-631 HSE-641 HSE-251 HSE-651 HSE-211 HSE-611 HSE-221 HSE-621